內容索引
 
  如何聯繫
 

12LABCONCO 排煙櫃 系列產品之選擇方式

目錄下載 (PDF)

Fume Hoods 排煙櫃目錄

影片簡介

Fume Hoods 排煙櫃簡介


1

排煙櫃為保護人員使用及調製化學物質及高危害性物品之安全設備,提供安全的作業區域, 櫃體內為抗酸鹼、防腐蝕設計,操作上有透明活動式視窗來降低化學物品對人員的危害性,抽氣式的環境會將有毒或腐蝕性的揮發氣體過濾後排出保護人員安全及防止二次污染危害,適用於化學工業,實驗室及生物科技等工業性用途上。  


簡單影片告訴你如何正確操作排煙櫃?


如何選擇對的排煙櫃?

目錄

維護安全的實驗室環境,是本系列產品的宗旨
我們所銷售的排煙櫃,全部經過嚴格風罩測試
並通過政府機關及獨立測試單位的各項嚴格測試標準
提供實驗是最安全的環境


為確保我們的排煙櫃符合 ASHRAE 110-1995 標準
Labconco的工程師在公司內部設置氣流測試實驗室
進行嚴格的氣流測試實驗
Labconco排煙櫃的ETL標誌與已認證
以美國UL 1805和/或美國UL 3101-1/61010-1 
和CAN /加空局標準C22.2編號1010.1 。 

         

所有Labconco常規實驗室氣體排氣抽風櫃系列都以安全操作為準則,經過嚴密的氣流測試,對化學氣體和有毒煙霧有良好的通風外排效果。
·Labconco 通風櫃的寬度有4, 5, 6, 8英尺。提供兩種配置供選擇: 
1. 主機+ 外排風管+抽風機。把櫃內氣體抽到建築物屋頂之外。 
2. 主機+內置抽風機。  化學氣體經特製活性碳濾器過濾後,氣體回流室內。無需外接通風管。適用於吸收某些化學氣體和有機溶劑如: Ammonia, Acids and Formaldehyde。
                                         
·基本配置: 主機 -  (型號/ Protector Premier Hood  ) 
·高溫高壓成型的玻璃纖維機身能夠承受廣泛使用的實驗用酸性、鹼性溶劑。完整無縫的整合桌面易於清潔。
·要另購:匹配的腳支架(或儲存底櫃),抽風機和外接風管。

"
• Occupational Health and Safety (OSHA)
          Federal Register 29 CFR Part 1910
• Industrial Ventilation, American
Conference of Governmental Industrial
Hygienists
• American Society of Heating,
Refrigerating, and Air-Conditioning
Engineers (ASHRAE) 110-1995
• ANSI Z9.5-2003
• Scientific Equipment & Furniture
Association (SEFA) 1-2005
• National Fire Protection Association
(NFPA) 45-2004
• American Society for Testing and
Materials (ASTM) E84-01
• Underwriters Laboratories (UL) 1805
• UL 3101-1/61010-1
• Canadian Standards Association
(CAN/CSA) C22.2 No. 1010.1
• European Community (CE)

設計特色


Top
12LABCONCO Protector®XStream® Laboratory Hoods排煙櫃
Protector®XStream® Laboratory Hoods


Fixtured models feature:
• Two pre-plumbed service fixtures with
forged brass valves, lower right side
with brass tubing for gas and lower left
side with copper tubing for cold water.
Components for converting either or
both fixtures to air and vacuum are
provided. Inlet tubing is not provided.
• One pre-wired 115 volt, 20 amp
electrical duplex receptacle on lower
right side.

 • SEFA 1-2005
• NFPA 45-2004
• ASTM E84-01
• ASHRAE 110-95
• ANSI Z9.5-2003
• UL 3101-1/61010-1
• CAN/CSA C22.2 No. 1010.1
• UL 1805
• CE Conformity Marking
(230 volt models)

 

 

Top
12Protector®XL™ Benchtop Laboratory Hoods
Protector®XL™ Benchtop Laboratory Hoods


• By-pass airflow design.
• Ergonomic air foil with aerodynamic
Clean-Sweep* airflow openings.
• Glacier white, dry powder epoxy-coated
steel exterior.
• Chemical-resistant molded composite
panel liner and pre-set baffle(s) with
flame spread less than 25 per
ASTM E-84.
• 3/16" thick tempered safety glass
vertical-rising sash(es) with epoxycoated
aluminum sash handle(s). Sash
does not extend above the hood when
fully open.
• Removable front and side panels and
front and interior service access panels
for access to plumbing and electrical
wiring.
• Pre-wired T8 fluorescent lighting, light
and blower switches for 115 volt, 60 Hz
operation.
• Epoxy-coated stainless steel, 12.81" ID
exhaust connection(s).

• SEFA 1-2005
• NFPA 45-2004
• ASTM E84-01
• ASHRAE 110-95
• ANSI Z9.5-2003
• UL 3101-1/61010-1
• CAN/CSA C22.2 No. 1010.1
• UL 1805 

     

Top
12Protector®XL™ Floor-Mounted Laboratory Hoods
Protector®XL™ Floor-Mounted Laboratory Hoods

 All models feature:
• By-pass airflow design.
• Glacier white, dry powder epoxy-coated
steel exterior.
• Chemical-resistant, fiberglass-reinforced
composite panel liner and adjustable
upper and lower baffles with flame
spread less than 25 per ASTM E-84.
• Removable front and side panels and
exterior and interior service access
panels for access to plumbing and
electrical wiring.
• Pre-wired T8 fluorescent lighting,
light and blower switches for 115 volt,
60 Hz operation.
• Shipped in multiple sections, top and
bottom.
• Epoxy-coated stainless steel, 12.81" ID
exhaust connection(s).

 

Top
12Protector®XLE™ Laboratory Hoods
Protector®XLE™ Laboratory Hoods

 

 

    Top

    12Protector® ClassMate® Laboratory Hoods
    Protector® ClassMate® Laboratory Hoods
    1

     

     


      Copyright © 2005~2007 Dayi Technology Inc. All rights reserved. 2024年2月29日 > 更新

      1
      1 聯絡電話:02-26511222 傳真:02-26515222 郵遞區號:11580
      台北市南港區舊莊街一段1701F | mail:dayitech@dayitech.com